Every Graco® machine contains two Y strainer filters. Each Y strainer filter is located at the base of the machine’s displacement pumps. To sustain a well-running machine, Y strainer filter maintenance should be performed at least every two months.
The Process
STEP 1
Locate waste oil pump and set air regulator pressure to 0 PSI and/or turn off main air supply.
STEP 2
Locate Y strainer in-line at pump and remove cap fitting by unscrewing.
By Ben Alden, Rhino Linings Technical Service Representative
Every Graco® machine contains two Y strainer filters. Each Y strainer filter is located at the base of the machine’s displacement pumps. To sustain a well-running machine, Y strainer filter maintenance should be performed at least every two months.
The Process
STEP 1
Locate waste oil pump and set air regulator pressure to 0 PSI and/or turn off main air supply.
STEP 2
Locate Y strainer in-line at pump and remove cap fitting by unscrewing.
STEP 3
Remove filter from Y strainer. Place cup under Y strainer when removing filter to contain spillage.
STEP 4
Use an air gun, soft bristled brush, or rag dampened with water or cleaning fluid to clean filter.
STEP 5
Examine filter. If damaged, replace with new filter, part #11303.
STEP 6
Grease threads on the Y strainer cap and reassemble.
STEP 7
Reattach air lines to drum pumps. Recirculate product for 1 to 2 minutes. This will remove any air slug from system created by cleaning process. It is very important to recirculate.
Running Out Of Parts?
If you ever need more parts for your Graco machine, we are your one-stop shop. Y strainer filters are just one of the many products offered in the Rhino Linings Webstore. You can either order online, send us an email or call 858-450-0441.
